| 2029B |
 |
•Perfect
level match throughout the system from D/A converter to power
amplifier outputs |
|
Genelec 2029B Digital Monitoring System has a 96 kHz/24 bit digital audio interface. This has several significant advantages. When you are working with a digital audio workstation or you are processing audio in a modern studio, your signal is digital. The 2029B allows you to monitor what you have in your digital format. The 2029B supports all the same modes of operation as the analog Genelec 1029A. You can use it in surround audio systems. Due to its compact size, integrated construction, excellent dispersion and precise stereo imaging, the 2029B system is ideal for near field monitoring, mobile vans, digital audio workstations,broadcast and TV control rooms, surround sound systems, home studios, multimedia applications and also for use with computer soundcards. The Directivity Control Waveguide (DCW ™) technology provides excellent frequency balance even in difficult acoustic environments. |
|
Retail
$1,999 CAD (Pair)
|
Our
Price $1,185 US (Pair)
|
Our
Price $1,824 CAD (Pair)
|
| System Specifications | |
| Lower cut-off frequency, -3 dB: | < 68 Hz |
| Upper cut-off frequency, -3 dB: | > 20 kHz |
| Free field frequency response of system: | 70 Hz - 18 kHz |
| Maximum short term sine wave acoustic
output on axis in half space, averaged from 100 Hz to 3 kHz: @1m @0.5 m |
> 100
dB SPL > 106 dB SPL |
| Maximum long term RMS acoustic output
in same conditions with IEC-weighted noise (limited by driver unit protection
circuit): @1m @0.5 m |
> 98
dB SPL > 104 dB SPL |
| Maximum peak acoustic output per pair on top of console, @ 1m from the engineer with music material: | > 110 dB SPL |
| Self generated noise level in free field @ 1m on axis: | < 10 dB |
| Harmonic distortion at 95 dB SPL at 1m
on axis: freq. 50Hz...100 Hz >100 Hz |
< 3% < 1% |
| Drivers Bass: Treble: |
130 mm (5")
cone 19 mm (3/4") metal dome |
| Weight: | 5.7 kg (12.5 lb) |
| Dimensions Height: Width: Depth: |
247 mm (9 3/4") 151 mm ( 6") 191 mm (7 1/2") |
| Amplifier | |
| Bass amplifier output power with an 4 Ohm load: | 40 W |
| Treble amplifier output power with an
8 Ohm load: Long term output power is limited by driver unit protection circuitry. |
40 W |
| Amplifier system distortion at nominal output: | THD < 0.08% SMPTE-IM < 0.08% CCIF-IM < 0.08% DIM 100 < 0.08% |
| Signal to Noise ratio, referred to full output: | Bass > 90 dB Treble > 90 dB |
| Mains voltage: | 100/200 or 115/230 V |
| Voltage operating range: | ±10% |
| Power consumption: | Idle 9 VA Full output 80 VA |
| Crossover | |
| Inputs | Input 1: XLR female Input 2: 1/4 " jack |
balanced 10
kOhm balanced 10 kOhm |
| Volume control: | Variable from mute to -6
dBu 100 dB SPL @ 1m |
|
| Subsonic filter below 68 Hz : | 18 dB/octave | |
| 1091A Subwoofer output (input 2) at 100 dB SPL: | -23 dBu into 33 kOhm load | |
| Ultrasonic filter above 25 kHz: | 12 dB/octave | |
| Crossover frequency, Bass/Treble: | 3.3 kHz | |
| Crossover acoustical slopes: | 24 - 32 dB/octave | |
| Treble tilt control operating range: | from 0 to -2 dB @ 15 kHz | |
| Bass roll-off | -6 dB step @ 85 Hz (with 1091A subwoofer). |
|
| Bass tilt control operating range in -2 dB steps: | from 0 to -6 dB @ 150 Hz | |
| The 'CAL' position is with all tone controls set to 'off' and the volume control to maximum (fully clockwise). | ||
| Digital |
| Digital input 3: | 2029B: XLR female 2029B-Y: BNC female |
|
| Maximum input wordlength: | 24 bits | |
| Input format: | AES/EBU, SP-DIF*, |
|
| Input termination impedance: | 2029B: 110 Ohms 2029B-Y: 75 Ohms |
|
| Input sampling rate: | 29-100kHz (no de-emphasis), 44.1 kHz |
|
| Jitter resiliance: | 0.15 unit intervals | |
| Dynamic range (A weighted, triangular PDF dither, 24 bit data): | 113dB | |
| De-emphasis: | 50/15µs, automatic | |
| Recovered clock jitter: | 200ps RMS typical | |
| *An optional impedance matching adapter is required for SP-DIF formatted signal input. |
©2000-2002 Canada Promedia Inc. and Shahin Al Rashid Website Design. All rights reserved.
