1038A

•Frequency response: 33 - 20k Hz (-3 dB)
•124 dB SPL (peak) per pair @ 2m with music material
•385 mm (15") woofer
•130 mm (5") high sensitivity direct radiating cone  driver loaded with a Directivity Control Waveguide™  (DCW™)
•25 mm (1") metal dome tweeter with proprietary DCW
•110 litre vented cabinet
•Tri-amplified: 400 W, 120 W, 120 W
•Electronic crossover and protection circuitry
•Built in bass, mid and treble level controls, bass roll  off and tilt controls
•Rack mount adators available for soffit installations

The high power and broad bandwidth of the 1038A make it capable of fulfilling the roles of the larger models in the range, such as music and surround sound monitoring, but it is also eminently suitable for TV and video post production, broadcast monitoring, CD mastering and use in project studios, drama studios and cutting rooms. As main monitors, 1038As will give excellent results either free standing or flush mounted in the wall.

The 1038A is a TEC (Technical Excellence & Creativity) award winner.

See 1038A studio applications from: Counterpoint Studios, 20th Century Fox, Swedish TV4

THX ® pm3 certified

THX and Lucasfilm are (C) Lucasfilm Ltd. & TM. All rights are reserved. Used under authorization.

Retail $10,499 CAD (Each)
Our Price $5,972 US (Each)
Our Price $9,188 CAD (Each)

System Specifications
Upper cut-off frequency, -3 dB: > 20kHz
Free field frequency response of system: 35Hz - 20kHz (± 2.5 dB)
Maximum short term sine wave acoustic output on axis in half space, averaged from 100Hz to 3kHz
@ 1m
@ 0.5m		 > 120dB SPL
> 126dB SPL
Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver unit protection): > 116dB SPL @ 1m
> 122dB SPL @ 0.5m
Maximum peak acoustic output per pair, @ 2m from the engineer with music material: > 124dB SPL
Self generated noise level in free field @ 2m on axis: < 15dB (A-weighted)
Harmonic distortion at 95dB SPL @ 1m on axis
50...100Hz
  >100Hz		 < 1%
< 0.5%
Drivers:
bass
mid
treble		 385mm (15") cone
1 x 130mm (5") cone
25mm (1") metal dome
Weight 60 kg (130 lb)
Dimensions:
Height
Width
Depth		 810mm (31 7/8")
480mm (18 7/8")
420mm (16 9/16")
Amplifier
Bass amplifier output power with a 4 Ohm load:
Long term output power is limited by driver unit protection circuitry. 		400 W
Mid amplifier output power with an 8 Ohm load:
Long term output power is limited by driver unit protection circuitry. 		120 W
Treble amplifier output power with an 8 Ohm load:
Long term output power is limited by driver unit protection circuitry. 		120 W
Slew rate: 80V/µs
Amplifier system distortion at nominal output: THD < 0.05%
SMPTE-IM < 0.05%
CCIF-IM < 0.05%
DIM 100 < 0.05%
Signal to Noise ratio, referred to full output: Bass > 100dB
Mid > 100dB
Treble > 100dB
Mains voltage: 100/200 or 115/230 V
Voltage operating range:
230V setting
115V setting		  
207-253V (± 10%)
104-126V (± 10%)
Power consumption: Idle 60 VA
Full output 500 VA
Crossover
Inputs  XLR female balanced 10kohm
Input level for 100dB SPL @1m output: variable from +6 to -6dBu
Input level for maximum short term output of 120dB SPL @1m variable +26...+14dBu
Subsonic filter below 33Hz : 18dB/octave
Ultrasonic filter above 25kHz: 12dB/octave
Crossover frequency, Bass/Mid/ and Mid/Treble: 410Hz, 3kHz
Crossover acoustical slopes: 24-32dB/octave
Level control operating range in 1dB steps -- bass, mid and treble: 0...-6dB and mute
Bass roll-off control in 2dB steps 0...-8dB @33Hz
Bass tilt control operating range in 2dB steps: 0...-8dB @80Hz
The 'CAL' position is with all tone controls set to 'off'and the volume control to maximum (fully clockwise).

©2000-2002 Canada Promedia Inc. and Shahin Al Rashid Website Design. All rights reserved.