| 1039A |
 |
Frequency response: |
|
This very compact broadband system is ideal for nearfield monitoring, broadcast monitoring, TV control rooms, mobile vans, video post production or where space is very limited in project and home studios, digital workstations, and surround sound monitoring. The 1030A is a TEC (Technical Excellence & Creativity) award winner. |
|
Retail
$1,649 CAD (Each)
|
Our
Price $934 US (Each)
|
Our
Price $1,438 CAD (Each)
|
| System Specifications | |
| Lower cut-off frequency, -3 dB: | < 52 Hz |
| Upper cut-off frequency, -3 dB: | > 20 kHz |
| Free field frequency response of system: | 55 Hz - 18 kHz (± 2.5 dB) |
| Maximum short term sine wave acoustic
output on axis in half space, averaged from 100 Hz to 3 kHz: @ 1m @ 0.5m |
>
105 dB SPL > 111 dB SPL |
| Maximum long term RMS acoustic output
in same conditions with IEC weighted noise (limited by driver unit protection
circuit): @ 1m @ 0.5m |
>
99 dB SPL > 105 dB SPL |
| Maximum peak acoustic output per pair on top of console, @ 1 m from the engineer with music material: | > 115 dB |
| Self generated noise level in free field @ 1m on axis: | < 10 dB (A-weighted) |
| Harmonic distortion at 90
dB SPL @ 1m on axis: Freq: 60...150 Hz > 150 Hz |
<
3% < 0.5% |
| Drivers Bass: Treble: |
170
mm (6 1/2") cone 19 mm (3/4") metal dome |
| Weight: | 7,6 kg (17 lb) |
| Dimensions Height: Width: Depth: |
312
mm (12 1/4") 200 mm ( 7 7/8") 240 mm (9 1/2") |
| Amplifier | |
| Bass amplifier output power with an 4 Ohm load: | 80 W |
| Treble amplifier output power with an
8 Ohm load: Long term output power is limited by driver unit protection circuitry. |
50 W |
| Amplifier system distortion at nominal output: | THD < 0.08% SMPTE-IM < 0.08% CCIF-IM < 0.08% DIM 100 < 0.08% |
| Signal to Noise ratio, referred to full output: | Bass > 95 dB Treble > 95 dB |
| Mains voltage: | 100/200 or 115/230 V |
| Voltage operating range at 230V setting: 115V setting: |
207 - 253V
(±10%) 104 - 126V (±10%) |
| Power consumption: | Idle 20 VA Full output 100 VA |
| Crossover | |
| Input connector: XLR female | pin 1 gnd pin 2 + pin 3 - |
| Input impedance: | 10 kOhm balanced |
| Input level for 100 dB SPL output @ 1m: | variable from +6 to -6 dBu |
| Input level for maximum short term sine wave output of 105 dB SPL @ 1m: | variable from +11 to -1 dBu |
| Subsonic filter below 50 Hz : | 18 dB/octave |
| Ultrasonic filter above 25 kHz: | 12 dB/octave |
| Crossover frequency, Bass/Treble: | 3.5 kHz |
| Crossover acoustical slopes: | 24 - 32 dB/octave |
| Treble tilt control operating range in 2 dB steps: | from +2 to -4 dB & MUTE |
| Bass roll-off control operating range in 2 dB steps: | from 0 to -8 dB @ 50 Hz |
| Bass tilt control operating range in 2 dB steps: | & MUTE |
| The 'CAL' position is with all tone controls set to 'off' and the volume control to maximum (fully clockwise). | |
©2000-2002 Canada Promedia Inc. and Shahin Al Rashid Website Design. All rights reserved.
