| 1029A |
 |
The
extremely compact 1029A is a powerful bi-amplified nearfield monitor
system ideal for project and home studios, digital workstations, and
surround sound monitoring. The monitor has a very rugged cast aluminium construction and magnetic stray field shielding as default for every single unit. Vented speaker enclosure contains an amplification unit, including an active electronic crossover, overload protection circuitry and two power amplifiers, one for each driver. |
|
Genelec's unique Directivity Control WaveguideTM (DCWTM) for excellent stereo imaging and frequency balance, even in difficult acoustic environments. Performance comparable to much larger systems (110 dB SPL at 1 meter for a pair). Versatile room response controls allow matching of the system to its surroundings. Sufficient LF extension (-3dB at 68Hz) for most applications. If very large sound level and low cutoff frequency are required it can be complemented with the 1091A subwoofer (-3dB at 40Hz). The speakers may be used in vertical or horizontal orientations. The 1029A/1091A combination is a TEC (Technical Excellence & Creativity) award and PAR (Pro Audio Review) Excellence award winner. |
|
Retail
$799 CAD (Each)
|
Our
Price $455 US (Each)
|
Our
Price $700 CAD (Each)
|
| System Specifications | |
| Lower cut-off frequency, -3 dB: | < 68 Hz |
| Upper cut-off frequency, -3 dB: | > 20 kHz |
| Free field frequency response of system: | 70 Hz - 18 kHz
|
| Maximum short term sine wave output on
axis in half space, averaged from 100 Hz to 3 kHz: @ 1m @ 0.5m |
> 100 dB SPL > 106 dB SPL |
| Maximum long term RMS acoustic output
in the same conditions with IEC weighted noise (limited by driver unit
protection): @ 1m @ 0.5m |
> 98 dB SPL > 104 dB SPL |
| Maximum peak acoustic output per pair on top of console, @ 1 m from the engineer with music material: | > 110 dB SPL |
| Self generated noise level in free field @ 1m on axis: | <10 dB (A-weighted) |
| Harmonic distortion at 85 dB SPL @
1m on axis 75...150Hz >150Hz |
<
3% < 1% |
| Drivers: bass treble |
130
mm (5") cone |
| Weight: | 5.7 kg (12.5 lb) |
| Dimensions: Height Width Depth |
247
mm (9 3/4") 151 mm ( 6") 191 mm (7 1/8") |
| Amplifier | |
| Bass amplifier output power with an 8
Ohm load: Long term output power is limited by driver unit protection circuitry. |
40 W |
| Treble amplifier output power with
an 8 Ohm load: Long term output power is limited by driver unit protection circuitry. |
40 W |
| Amplifier system distortion at nominal output: | THD < 0.08% SMPTE-IM < 0.08% CCIF-IM < 0.08% DIM 100 < 0.08% |
| Signal to Noise ratio, referred to full output: | Bass >
90 dB Treble > 90 dB |
| Mains voltage: | 100/200 or 115/230 V |
| Voltage operating range: | ±10% |
| Power consumption: | Idle 9 VA Full output 80 VA |
| Crossover | |
| Inputs Input 1:XLR female Input 2:1/4 " jack |
balanced
10 kOhm balanced 10 kOhm |
| Volume control: | Variable from mute to -6 dBu 100 dB SPL @ 1m |
| Subsonic filter below 68 Hz : | 18 dB/octave |
| 1091A Subwoofer output (input 2) at 100 dB SPL: | -23 dBu into 33 kOhm load |
| Ultrasonic filter above 25 kHz: | 12 dB/octave |
| Crossover frequency, Bass/Treble: | 3.3 kHz |
| Crossover acoustical slopes: | 24 - 32 dB/octave |
| Treble tilt control operating range: | from 0 to -2 dB @ 15 kHz |
| Bass roll-off : | -6 dB step @
85 Hz (with 1091A subwoofer). |
| Bass tilt control operating range in -2 dB steps: | from 0 to -6 dB @ 150 Hz |
| The 'CAL' position is with all tone controls set to 'off' and the volume control to maximum (fully clockwise). | |
©2000-2002 Canada Promedia Inc. and Shahin Al Rashid Website Design. All rights reserved.
